News

July 2013 - M.U.S. International announce the C65M1 HP

M.U.S. International announces the introduction of new high performance miniature centrifugal blower C65M1 HP.

The C65M1 HP is a new version of our popular C65 series combining high performance and low cost. Dimensions: 65 x 63 x 46 mm.

This blower achieve the impressive Pressure of 6650 Pa and can work at 250 lpm @ 4500 Pa.

June 2012 - M.U.S International tops itself by announcing the introduction of the C75H2 miniature blower

M.U.S International tops itself by announcing the introduction of the C75H2 miniature blower.

C75H2-24PS-01 blower

Based on our proprietary brushless motor, the C75H2 blower is designed for very high pressure and medium-high flow. Dimensions: 75 x 70 x 98 mm.

At nominal voltage, the maximum pressure is in the 11'500 Pa. range with the maximum flow around 575 l/mn.

May 2012 - M.U.S International announces the introduction of our highest performance miniature centrifugal blowers to date

MUS International announces the introduction our highest performance blowers yet.

C65H2-24PS-01 blower

Based on our proprietary brushless motor, the C65H2 blower is designed for high pressure and medium flow. Dimensions: 65 x 63 x 97 mm.

At nominal voltage, the maximum pressure is in the 9'500 Pa. range with the maximum flow around 475 l/mn.

April 2012 - M.U.S International announces the introduction of three new high performance miniature centrifugal blowers with internal drivers

MUS International announces the introduction of three new high performance miniature centrifugal blowers with internal drivers.

The proprietary internal driver allows the customer to drive the blower using different modes. It has an input for speed control and output for blower speed and motor temperature.

C65M1-24PS-04 blower

The C65M1 blower is a medium performance blower. Dimensions: 65 x 63 x 59 mm.

At nominal voltage, the maximum pressure is in the 3'750 Pa. range with the maximum flow around 400 l/mn.

C75M1-24PS-04 blower

The C75M1 blower is a medium performance blower, giving higher performances than the C65M1. Dimensions: 75 x 71 x 58 mm.

At nominal voltage, the maximum pressure is in the 4'250 Pa. range with the maximum flow around 550 l/mn.

C55H1-24PS-04 blower

The C55H1 blower is a small but powerful blower capable of very high performances for its size. Dimensions: 55 x 50 (65) x 50 mm.

At nominal voltage, the maximum pressure is in the 5'500 Pa. range and the maximum flow is higher than 550 l/mn.

February 2012 - M.U.S. International announces the introduction of two new drivers

M.U.S. International announces the introduction of two new driver:

MUS30/2.5/1Q-I1 driver

The MUS30/2.5/1Q-I1 driver was developed for the low power blowers working in 1-Quadrant applications (continuous operations). This driver can be integrated in the C55H1, C65M1, C75M1 and future C95M1.

MUS50/5/4Q-E1 driver and MUS50/5/4Q-M1 mother board

The MUS50/5/4Q-E1 is a small 4-Quadrant DSP based digital driver designed for controlling our high power blowers up to 250W. The MUS50/5/4Q-E1 is designed to be mounted on the customer’s mother board through pins for the best of both worlds: seamless integration and best performances. The MUS50/5/4Q-E1 driver can also be mounted on our MUS50/5/4Q-M1 mother board.

The MUS50/5/4Q-M1 mother board was developed for interfacing the driver with the customer electronics, power supplies and measuring equipment and is very handy for limited volume production or to allow the testing of systems before the customer's electronics is ready. It allows to test the MUS50/5/4Q-E1 easily and without welding, or to run independently the blowers.

Page 2 of 3